// CODE SNIPPET
710.8 Sump and Receiving Tank Construction
JUMP TO FULL CODE CHAPTER
Sumps and receiving tanks shall be watertight and shall be constructed of concrete, metal, or other approved materials. Where constructed of poured concrete, the walls and bottom shall be adequately reinforced and designed to recognized acceptable standards. Metal sumps or tanks shall be of such thickness as to serve their intended purpose and shall be treated internally and externally to resist corrosion.
Related Code Sections
710.8 Sanitary Drainage, Sump and Receiving Tank Construction
Sumps and receiving tanks shall be watertight and shall be constructed of concrete, metal, or other approved materials. Where constructed of poured ...
2021 Oregon Plumbing Specialty Code > 7 Sanitary Drainage > 710.0 Drainage of Fixtures Located Below the Next Upstream Manhole or Below the Main Sewer Level > 710.8 Sump and Receiving Tank Construction
810.0 Indirect Wastes, Steam and Hot Water Drainage Condensers and Sumps
Condensers and sumps shall be properly trapped at the outlet with a deep seal trap extending to within 6 inches (152 mm) of the bottom of the tank. The top ...
2021 Oregon Plumbing Specialty Code > 8 Indirect Wastes > 810.0 Steam and Hot Water Drainage Condensers and Sumps
Section P3007 Sanitary Drainage, Sumps and Ejectors
existing structures, the sump shall not receive drainage from any piping within the building capable of being discharged by gravity to the building ...
1101.7 Storm Drainage, Building Subdrains
Building subdrains located below the public sewer level shall discharge into a sump or receiving tank, the contents of which shall be automatically ...
2021 Oregon Plumbing Specialty Code > 11 Storm Drainage > 1101.0 General > 1101.7 Building Subdrains
710.7 Sanitary Drainage, Drainage and Venting Systems
The drainage and venting systems, in connection with fixtures, sumps, receiving tanks, and mechanical waste-lifting devices shall be installed under ...
2021 Oregon Plumbing Specialty Code > 7 Sanitary Drainage > 710.0 Drainage of Fixtures Located Below the Next Upstream Manhole or Below the Main Sewer Level > 710.7 Drainage and Venting Systems