// CODE SNIPPET
1810.7.4 Structural Core
JUMP TO FULL CODE CHAPTER
The gross cross-sectional area of the structural steel core shall not exceed 25 percent of the gross area of the caisson. The minimum clearance between the structural core and the pipe shall be 2 inches (51 mm). Where cores are to be spliced, the ends shall be milled or ground to provide full contact and shall be full-depth welded.
Related Code Sections
1810.7.4 Soils and Foundations, Structural Core
The gross cross-sectional area of the structural steel core shall not exceed 25 percent of the gross area of the caisson. The minimum clearance ...
2010 Building Code of NY > 18 Soils and Foundations > 1810 Cast-In-Place Concrete Pile Foundations > 1810.7 Caisson Piles > 1810.7.4 Structural Core
22.214.171.124.1 Electric Elevators,
The panels shall be constructed of noncombustible material, or of a structural core made of combustible material if covered with not less than 0.45 ...
Safety Code for Elevators and Escalators 2016 of New York State > 2 Electric Elevators > 2.11 Protection of Hoistway Openings > 2.11.12 Entrances, Vertical Slide Type > 126.96.36.199 Panels > 188.8.131.52.1
184.108.40.206 Structural Analysis,
a concrete core encased by structural steel or within transverse reinforcement surrounding a structural steel core shall be permitted to be used ...
Building Code Requirements for Structural Concrete of New York State > 6 Structural Analysis > 6.2 General > 6.2.5 > 220.127.116.11
18.104.22.168 Steel Reinforcement Properties, Durability, and Embedments,
For structural steel used in composite columns with a structural steel core, value of f y shall not exceed 50,000 psi ...
Building Code Requirements for Structural Concrete of New York State > 20 Steel Reinforcement Properties, Durability, and Embedments > 20.4 Structural Steel, Pipe, and Tubing for Composite Columns > 20.4.2 Design Properties > 22.214.171.124
1810.3.9.6 Soils and Foundations, Socketed Drilled Shafts
filled with concrete. Socketed drilled shafts shall have reinforcement or a structural steel core for the length as indicated by an approved method ...
Building Code 2015 of New York State > 18 Soils and Foundations > 1810 Deep Foundations > 1810.3 Design and Detailing > 1810.3.9 Cast-In-Place Deep Foundations > 1810.3.9.6 Socketed Drilled Shafts