// CODE SNIPPET
2101.2.2 Strength Design
JUMP TO FULL CODE CHAPTER
Masonry designed by the strength design method shall comply with the provisions of Sections 2106 and 2108, except that autoclaved aerated concrete (AAC) masonry shall comply with the provisions of Section 2106 and Chapters 1 and 8 of TMS 402/ACI 530/ASCE 5.
Related Code Sections
2101.2.2 Masonry, Strength Design
Masonry designed by the strength design method shall comply with the provisions of Sections 2106 and 2108, except that autoclaved aerated concrete ...
Building Code 2012 of South Holland > 21 Masonry > 2101 General > 2101.2 Design Methods > 2101.2.2 Strength Design
Section 2108 Masonry, Strength Design of Masonry
The design of masonry structures using strength design shall comply with Section 2106 and the requirements of Chapters 1 through 7 and Chapter 9 ...
Section 2108 Masonry, Strength Design of Masonry
The design of masonry structures using strength design shall comply with Section 2106 and the requirements of Chapters 1 and 3 of TMS 402/ACI 530 ...
Section 1909 Concrete, Anchorage to Concrete — Strength Design
The provisions of this section shall govern the strength design of anchors installed in concrete for purposes of transmitting structural loads from ...
22.2.2.1 Sectional Strength,
Maximum strain at the extreme concrete compression fiber shall be assumed equal to 0.003 ...
Building Code Requirements for Structural Concrete of South Holland > 22 Sectional Strength > 22.2 Design Assumptions for Moment and Axial Strength > 22.2.2 Design Assumptions for Concrete > 22.2.2.1