// CODE SNIPPET
1910.216(f)(2) Stopping Limits for Mills
JUMP TO FULL CODE CHAPTER
All mills irrespective of the size of the rolls or their arrangement (individually or group-driven) shall be stopped within a distance, as measured in inches of surface travel, not greater than 1 1/2 percent of the peripheral no-load surface speeds of the respective rolls as determined in feet per minute.
Related Code Sections
1910.216(f)(2) Machinery and Machine Guarding, Stopping Limits for Mills
All mills irrespective of the size of the rolls or their arrangement (individually or group-driven) shall be stopped within a distance, as measured ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.216 Mills and Calenders in the Rubber and Plastics Industries > 1910.216(f) Stopping Limits > 1910.216(f)(2) Stopping Limits for Mills
1910.261(e)(10) Special Industries, Stops
All control devices shall be locked out and tagged when knives are being changed ...
OSHA 1910 General Industry > R Special Industries > 1910.261 Pulp, Paper, and Paperboard Mills > 1910.261(e) Preparing Pulpwood > 1910.261(e)(10) Stops
1910.144(a)(1)(iii) General Environmental Controls, Stop
Emergency stop bars on hazardous machines such as rubber mills, wire blocks, flat work ironers, etc., shall be red. Stop buttons or electrical ...
OSHA 1910 General Industry > J General Environmental Controls > 1910.144 Safety Color Code for Marking Physical Hazards > 1910.144(a) Color Identification > 1910.144(a)(1) Red > 1910.144(a)(1)(iii) Stop
1910.261(k)(1) Special Industries, Emergency Stops
Paper machines shall be equipped with devices that will stop the machine quickly in an emergency. The devices shall consist of push buttons ...
OSHA 1910 General Industry > R Special Industries > 1910.261 Pulp, Paper, and Paperboard Mills > 1910.261(k) Machine Room > 1910.261(k)(1) Emergency Stops
1910.261(l)(2) Special Industries, Emergency Stops
of the machine within easy reach of all employees. These devices shall be tested by making use of them when stopping the machine ...
OSHA 1910 General Industry > R Special Industries > 1910.261 Pulp, Paper, and Paperboard Mills > 1910.261(l) Finishing Room > 1910.261(l)(2) Emergency Stops