// CODE SNIPPET

1910.255(b)(7) Stop Buttons

OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.255 Resistance Welding > 1910.255(b) Spot and Seam Welding Machines (Nonportable) > 1910.255(b)(7) Stop Buttons

JUMP TO FULL CODE CHAPTER

Two or more safety emergency stop buttons shall be provided on all special multispot welding machines, including 2-post and 4-post weld presses.

Related Code Sections

1910.255(b)(7) Welding, Cutting, and Brazing, Stop Buttons

Two or more safety emergency stop buttons shall be provided on all special multispot welding machines, including 2-post and 4-post weld presses ...

OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.255 Resistance Welding > 1910.255(b) Spot and Seam Welding Machines (Nonportable) > 1910.255(b)(7) Stop Buttons

1910.144(a)(1)(iii) General Environmental Controls, Stop

Emergency stop bars on hazardous machines such as rubber mills, wire blocks, flat work ironers, etc., shall be red. Stop buttons or electrical ...

OSHA 1910 General Industry > J General Environmental Controls > 1910.144 Safety Color Code for Marking Physical Hazards > 1910.144(a) Color Identification > 1910.144(a)(1) Red > 1910.144(a)(1)(iii) Stop

1910.263(i)(7)(iii) Special Industries,

Where hazard of getting caught exists a sufficient number of stop buttons shall be provided to enable quick stopping of the conveyor ...

OSHA 1910 General Industry > R Special Industries > 1910.263 Bakery Equipment > 1910.263(i) Miscellaneous Equipment > 1910.263(i)(7) Conveyors > 1910.263(i)(7)(iii)

1910.262(h)(2)(ii) Special Industries, Push-Button Control

Slashers operated by push-button control shall have one start button at each end of the machine and stop buttons shall be located on both sides ...

OSHA 1910 General Industry > R Special Industries > 1910.262 Textiles > 1910.262(h) Slashers > 1910.262(h)(2) Enclosed Hot Air Dryer > 1910.262(h)(2)(ii) Push-Button Control

1910.179(g)(5)(iii)(b) Materials Handling and Storage,

An undervoltage trip for the main circuit breaker operated by an emergency stop button in the pendant pushbutton in the pendant pushbutton station ...

OSHA 1910 General Industry > N Materials Handling and Storage > 1910.179 Overhead and Gantry Cranes > 1910.179(g) Electric Equipment— > 1910.179(g)(5) Switches > 1910.179(g)(5)(iii) > 1910.179(g)(5)(iii)(b)

Calculate Code Requirements

Code Calculators automatically generate a detailed list of requirements.

Upgrade to premium to access these features.

LEARN MORE

About UpCodes

UpCodes provides an intuitive resource to navigate building regulations.

Codes are organized by jurisdiction to help you understand which regulations apply to your project.

Find Your Codes