// CODE SNIPPET
R301.2.2.3 Stone and Masonry Veneer
JUMP TO FULL CODE CHAPTER
Anchored stone and masonry veneer shall comply with the requirements of Sections R702.1 and R703.
Related Code Sections
R301.2.2.3 Building Planning, Stone and Masonry Veneer
Anchored stone and masonry veneer shall comply with the requirements of Sections R702.1 and R703 ...
Residential Code 2018 of Kansas > 3 Building Planning > R301 Design Criteria > R301.2 Climatic and Geographic Design Criteria > R301.2.2 Seismic Provisions > R301.2.2.3 Stone and Masonry Veneer
R603.9.5 Wall Construction, Structural Sheathing for Stone and Masonry Veneer
Where stone and masonry veneer are installed in accordance with Section R703.8, the length of full-height sheathing for exterior and interior wall ...
Residential Code 2018 of Kansas > 6 Wall Construction > R603 Cold-Formed Steel Wall Framing > R603.9 Structural Sheathing > R603.9.5 Structural Sheathing for Stone and Masonry Veneer
R703.8 Wall Covering, Anchored Stone and Masonry Veneer, General
Anchored stone and masonry veneer shall be installed in accordance with this chapter, Table R703.3(1) and Figure R703.8. These veneers installed over ...
Residential Code 2018 of Kansas > 7 Wall Covering > R703 Exterior Covering > R703.8 Anchored Stone and Masonry Veneer, General
R703.8.6 Wall Covering, Weepholes
Weepholes shall be provided in the outside wythe of masonry walls at a maximum spacing of 33 inches (838 mm) on center. Weepholes shall be not less ...
Residential Code 2018 of Kansas > 7 Wall Covering > R703 Exterior Covering > R703.8 Anchored Stone and Masonry Veneer, General > R703.8.6 Weepholes
R703.8.3.2 Wall Covering, Maximum Span
a minimum length of 18 inches (457 mm) of masonry veneer on each side of opening as shown in Figure R703.8.3.2. Provide a minimum 5-inch by 3 1 / 2 ...
Residential Code 2018 of Kansas > 7 Wall Covering > R703 Exterior Covering > R703.8 Anchored Stone and Masonry Veneer, General > R703.8.3 Lintels > R703.8.3.2 Maximum Span