// CODE SNIPPET
1910.265(c)(27)(v) Sticker Alignment
JUMP TO FULL CODE CHAPTER
Stickers shall extend the full width of the package, shall be uniformly spaced, and shall be aligned one above the other. Stickers may be lapped with a minimum overlapping of 12 inches. Stickers shall not protrude more than 2 inches beyond the sides of the package.
Related Code Sections
1910.265(c)(27)(v) Special Industries, Sticker Alignment
Stickers shall extend the full width of the package, shall be uniformly spaced, and shall be aligned one above the other. Stickers may be lapped ...
OSHA 1910 General Industry > R Special Industries > 1910.265 Sawmills > 1910.265(c) Building Facilities, and Isolated Equipment > 1910.265(c)(27) Lumber Piling and Storage > 1910.265(c)(27)(v) Sticker Alignment
1910.66(f)(6)(iii) Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms,
Launch guide mullions indexed to the building guides and retained in alignment with the building guides shall be used to align drive wheels entering ...
OSHA 1910 General Industry > F Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms > 1910.66 Powered Platforms for Building Maintenance > 1910.66(f) Powered Platform Installations-Equipment > 1910.66(f)(6) Supported Equipment > 1910.66(f)(6)(iii)
1910.272(q)(6) Special Industries,
with a belt alignment monitoring device which will initiate an alarm to employees when the belt is not tracking properly ...
OSHA 1910 General Industry > R Special Industries > 1910.272 Grain Handling Facilities > 1910.272(q) Inside Bucket Elevators > 1910.272(q)(6)
1910.219(p)(3) Machinery and Machine Guarding, Bearings
Bearings shall be kept in alignment and properly adjusted ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.219 Mechanical Power-Transmission Apparatus > 1910.219(p) Care of Equipment > 1910.219(p)(3) Bearings
1910.219(p) Machinery and Machine Guarding, Care of Equipment
shall be kept in alignment, free from rust and excess oil or grease ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.219 Mechanical Power-Transmission Apparatus > 1910.219(p) Care of Equipment