Special inspection for steel construction other than structural steel shall be in accordance with Table 1705.2.2 and this section.
REQUIRED VERIFICATION AND INSPECTION OF STEEL CONSTRUCTION OTHER THAN STRUCTURAL STEEL
|VERIFICATION AND INSPECTION||CONTINUOUS||PERIODIC||REFERENCED |
|1. Material verification of cold-formed steel deck:|
|a. Identification markings to conform to ASTM standards specified |
in the approved construction documents.
|—||X||Applicable ASTM |
|b. Manufacturer's certified test reports.||—||X|
|2. Inspection of welding:|
|a. Cold-formed steel deck:|
|1) Floor and roof deck welds.||—||X||AWS D1.3|
|b. Reinforcing steel:|
|1)Verification of weldability of |
reinforcing steel other than ASTM
|—||X||AWS D1.4 |
|2) Reinforcing steel resisting flexural and axial forces in |
intermediate and special moment frames, and boundary
elements of special structural walls of concrete and shear reinforcement.
|3) Shear reinforcement.||X||—|
|4) Other reinforcing steel.||—||X|
|For SI: 1 inch = 25.4 mm.|
|a. Where applicable, see also Section 1705.11, Special inspections for seismic resistance.|
Welding inspection and welding inspector qualification shall be in accordance with this section.
Welding inspection and welding inspector qualification for cold-formed steel floor and roof decks shall be in accordance with AWS D1.3.
Welding inspection and welding inspector qualification for reinforcing steel shall be in accordance with AWS D1.4 and ACI 318.
Where a cold-formed steel truss clear span is 60 feet (18 288 mm) or greater, the special inspector shall verify that the temporary installation restraint/bracing and the permanent individual truss member restraint/bracing are installed in accordance with the approved truss submittal package.