// CODE SNIPPET
1910.253(d)(4)(iii) Station Outlets Shall Be Marked to Indicate the Name of the Gas
Related Code Sections
1910.253(d)(4)(iii) Welding, Cutting, and Brazing, Station Outlets Shall Be Marked to Indicate the Name of the Gas
OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.253 Oxygen-Fuel Gas Welding and Cutting > 1910.253(d) Service Piping Systems > 1910.253(d)(4) Painting and Signs > 1910.253(d)(4)(iii) Station Outlets Shall Be Marked to Indicate the Name of the Gas
1910.110(b)(5) Hazardous Materials, Markings on Containers
and different style hoods are provided, the marking shall indicate the proper hood for each type of installation ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.110 Storage and Handling of Liquefied Petroleum Gases > 1910.110(b) Basic Rules > 1910.110(b)(5) Markings on Containers
1910.103(c)(1)(iii) Hazardous Materials, Marking
Each container shall be legibly marked to indicate "LIQUEFIED HYDROGEN - FLAMMABLE GAS" ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.103 Hydrogen > 1910.103(c) Liquefied Hydrogen Systems > 1910.103(c)(1) Design > 1910.103(c)(1)(iii) Marking
1910.253(e)(4) Welding, Cutting, and Brazing,
, pressure regulator, hydraulic seal, or combination of these devices shall be provided at each station outlet, including those on portable headers ...
OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.253 Oxygen-Fuel Gas Welding and Cutting > 1910.253(e) Protective Equipment, Hose, and Regulators > 1910.253(e)(4)
1910.303(e) Electrical, Marking
: The manufacturer's name, trademark, or other descriptive marking by which the organization ...