UpCodes logo
Jump To Full Code Chapter
Plumbing fixtures or other receptors receiving the discharge of indirect waste pipes shall be approved for the use proposed and shall be of such shape and capacity as to prevent splashing or flooding and shall be located where they are readily accessible for inspection and cleaning. No standpipe receptor for a clothes washer shall extend more than 30 inches (762 mm), or not less than 18 inches (457 mm) above its trap weir. No trap for a clothes washer standpipe receptor shall be installed below the floor, but shall be roughed in not less than 6 inches (152 mm) and not more than 18 inches (457 mm) above the floor. No indirect waste receptor shall be installed in a toilet room, closet, cupboard, or storeroom, or in a portion of a building not in general use by the occupants thereof; except standpipes for clothes washers shall be permitted to be installed in toilet and bathroom areas where the clothes washer is installed in the same room.

Related Code Sections

804.1 Indirect Wastes, Standpipe Receptors
washer standpipe receptor shall be installed below the floor, but shall be roughed in not less than 6 inches (152 mm) and not more than 18 inches (457 ...
P2706.1.2.1 Plumbing Fixtures, Laundry Tray Connection to Standpipe
Where a laundry tray waste line connects into a standpipe for an automatic clothes washer drain, the standpipe shall extend not less than 30 inches ...
Section P2709 Plumbing Fixtures, Shower Receptors
Where a shower receptor has a finished curb threshold, it shall be not less than 1 inch (25 mm) below the sides and back of the receptor. The curb ...
1023.12 Means of Egress, Standpipes
Standpipes and standpipe hose connections shall be provided where required by Sections 905.3 and 905.4 ...
1024.8 Means of Egress, Standpipes
Standpipes and standpipe hose connections shall be provided where required by Sections 905.3 and 905.4 ...