// CODE SNIPPET
608.2.2 Standard Roll-In Type Shower Compartments
JUMP TO FULL CODE CHAPTER
Standard roll-in type shower compartments shall be 30 inches (760 mm) wide minimum by 60 inches (1525 mm) deep minimum clear inside dimensions measured at center points of opposing sides and shall have a 60 inches (1525 mm) wide minimum entry on the face of the shower compartment.
A 30 inch (760 mm) wide minimum by 60 inch (1525 mm) long minimum clearance shall be provided adjacent to the open face of the shower compartment.
EXCEPTION: A lavatory complying with 606 shall be permitted on one 30 inch (760 mm) wide minimum side of the clearance provided that it is not on the side of the clearance adjacent to the controls or, where provided, not on the side of the clearance adjacent to the shower seat.
![]() |
Related Code Sections
608.5.2 Plumbing Elements and Facilities, Standard Roll-In Type Shower Compartments
In standard roll-in type shower compartments, the controls, faucets, and shower spray unit shall be located above the grab bar, but no higher than 48 ...
2010 ADA Standards > 6 Plumbing Elements and Facilities > 608 Shower Compartments > 608.5 Controls > 608.5.2 Standard Roll-In Type Shower Compartments
608.2 Plumbing Elements and Facilities, Size and Clearances for Shower Compartments
, not on the side of the clearance adjacent to the shower seat.
Figure 608.2.2 Standard Roll-In Type Shower Compartment Size and Clearance ...
2010 ADA Standards > 6 Plumbing Elements and Facilities > 608 Shower Compartments > 608.2 Size and Clearances for Shower Compartments
608.3 Plumbing Elements and Facilities, Grab Bars
Where a seat is provided in standard roll-in type shower compartments, grab bars shall be provided on the back ...
610.3 Plumbing Elements and Facilities, Shower Compartment Seats
Where a seat is provided in a standard roll-in shower compartment, it shall be a folding type, shall be installed on the side wall adjacent ...
2010 ADA Standards > 6 Plumbing Elements and Facilities > 610 Seats > 610.3 Shower Compartment Seats
608.2.3 Plumbing Elements and Facilities, Alternate Roll-In Type Shower Compartments
Figure 608.2.3 Alternate Roll-In Type Shower Compartment Size and Clearance ...
2010 ADA Standards > 6 Plumbing Elements and Facilities > 608 Shower Compartments > 608.2 Size and Clearances for Shower Compartments > 608.2.3 Alternate Roll-In Type Shower Compartments