// CODE SNIPPET
1910.219(m) Standard Guards-General Requirements
Jump To Full Code Chapter
Standard conditions shall be secured by the use of the following materials. Expanded metal, perforated or solid sheet metal, wire mesh on a frame of angle iron, or iron pipe securely fastened to floor or to frame of machine.
All metal should be free from burrs and sharp edges.
1910.219(m)(2) Methods of Manufacture
Expanded metal, sheet or perforated metal, and wire mesh shall be securely fastened to frame.
Related Code Sections
1910.219(m) Machinery and Machine Guarding, Standard Guards-General Requirements
Standard conditions shall be secured by the use of the following materials. Expanded metal, perforated or solid sheet metal, wire mesh on a frame ...
Working space required by this standard may not be used for storage. When normally enclosed live parts are exposed for inspection or servicing ...
1910.212(a) Machinery and Machine Guarding, Machine Guarding
of material without the operator placing a hand in the danger zone. Such tools shall not be in lieu of other guarding required by this section, but can only ...
1910.252(a)(1)(ii) Welding, Cutting, and Brazing, Guards
If the object to be welded or cut cannot be moved and if all the fire hazards cannot be removed, then guards shall be used to confine the heat ...
1910.265(c)(23)(i) Special Industries, Guarding
Open bins, bunkers, and hoppers whose upper edges extend less than 3 feet above working level shall be equipped with standard handrails and toe ...