• Codes
  • Features
    UpCodes Web UpCodes AI
  • Pricing
  • Sign Up
  • Log in
Log in
Sign Up
  • Code Library
  • Features
  • Pricing
  • About
  • Contact
  • Terms
  • Privacy
// CODE SNIPPET

803.12 Stability

Building Code 2015 of Utah > 8 Interior Finishes > 803 Wall and Ceiling Finishes > 803.12 Stability
JUMP TO FULL CODE CHAPTER
Interior finish materials regulated by this chapter shall be applied or otherwise fastened in such a manner that such materials will not readily become detached where subjected to room temperatures of 200°F (93°C) for not less than 30 minutes.
Share URL

Copy and paste the link below into emails, chats or browsers.

Copy

You can also copy or bookmark the link from your browser's address bar.

Related Code Sections


1605.1.1 Structural Design, Stability
Regardless of which load combinations are used to design for strength, where overall structure stability (such as stability against overturning ...
Building Code 2015 of Utah > 16 Structural Design > 1605 Load Combinations > 1605.1 General > 1605.1.1 Stability
1808.6.4 Soils and Foundations, Stabilization
Where the active zone of expansive soils is stabilized in lieu of designing foundations in accordance with Section 1808.6.1 or 1808.6.2, the soil ...
Building Code 2015 of Utah > 18 Soils and Foundations > 1808 Foundations > 1808.6 Design for Expansive Soils > 1808.6.4 Stabilization
1810.2.2 Soils and Foundations, Stability
Deep foundation elements shall be braced to provide lateral stability in all directions. Three or more elements connected by a rigid cap shall ...
Building Code 2015 of Utah > 18 Soils and Foundations > 1810 Deep Foundations > 1810.2 Analysis > 1810.2.2 Stability
1926.154(c) Fire Protection and Prevention, Stability
Heaters, when in use, shall be set horizontally level, unless otherwise permitted by the manufacturer's markings ...
OSHA 1926 Construction > F Fire Protection and Prevention > 1926.154 Temporary heating devices > 1926.154(c) Stability
803.12 Interior Finishes, Stability
Interior finish materials regulated by this chapter shall be applied or otherwise fastened in such a manner that such materials will not readily ...
Building Code 2015 of Utah > 8 Interior Finishes > 803 Wall and Ceiling Finishes > 803.12 Stability
About UpCodes

UpCodes provides an intuitive resource to navigate building regulations.

Codes are organized by jurisdiction to help you understand which regulations apply to your project.


Find Your Codes
COMPANY INFO About Contact Careers Terms Privacy
CATEGORY General New York City New York State California Codes Building Codes Online
PREMIUM Features Pricing Sign Up Log In
CODES IBC 2015 IRC 2015 IPC 2015 California Building Code 2016 Popular Sections
FOLLOW US