// CODE SNIPPET
M2105.11.3 Stab-Type Insert Fittings
JUMP TO FULL CODE CHAPTER
Joint surfaces shall be clean and free from moisture. Pipe ends shall be chamfered and inserted into the fittings to full depth. Fittings shall be manufactured in accordance with ASTM F1924.
Related Code Sections
1210.6.6.3 Hydronic Piping, Stab-Type Insert Fittings
Joint surfaces shall be clean and free from moisture. Pipe ends shall be chamfered and inserted into the fittings to full depth. Fittings shall ...
Mechanical Code 2018 of Kansas > 12 Hydronic Piping > 1210 Plastic Pipe Ground-Source Heat Pump Loop Systems > 1210.6 Joints > 1210.6.6 Polyethylene Plastic Pipe and Tubing for Ground-Source Heat Pump Loop Systems > 1210.6.6.3 Stab-Type Insert Fittings
M2105.11.3 Hydronic Piping, Stab-Type Insert Fittings
Joint surfaces shall be clean and free from moisture. Pipe ends shall be chamfered and inserted into the fittings to full depth. Fittings shall ...
Residential Code 2018 of Kansas > 21 Hydronic Piping > M2105 Ground-Source Heat-Pump System Loop Piping > M2105.11 Polyethylene Plastic Pipe and Tubing > M2105.11.3 Stab-Type Insert Fittings
(D) Wiring Methods and Materials, Inserts
Inserts shall be leveled and sealed against the entrance of concrete. Inserts shall be of metal and shall be fitted with grounded-type receptacles. A ...
National Electrical Code 2017 of Kansas > 3 Wiring Methods and Materials > 372 Cellular Concrete Floor Raceways > 372.18 Cellular Concrete Floor Raceways Installation > (D) Inserts
1203.14.1 Hydronic Piping, Compression-Type Fittings
Where compression-type fittings include inserts and ferrules or O-rings, the fittings shall be installed without omitting the inserts and ferrules ...
Mechanical Code 2018 of Kansas > 12 Hydronic Piping > 1203 Joints and Connections > 1203.14 Raised Temperature Polyethylene (PE-RT) Plastic Tubing > 1203.14.1 Compression-Type Fittings
1203.9.1 Hydronic Piping, Compression-Type Fittings
Where compression-type fittings include inserts and ferrules or O-rings, the fittings shall be installed without omitting the inserts and ferrules ...
Mechanical Code 2018 of Kansas > 12 Hydronic Piping > 1203 Joints and Connections > 1203.9 Cross-Linked Polyethylene (PEX) Plastic Tubing > 1203.9.1 Compression-Type Fittings