// CODE SNIPPET
1910.263(c)(3) Sprockets and V-Belt Drives
JUMP TO FULL CODE CHAPTER
Sprockets and V-belt drives located within reach from platforms or passageways or located within 8 feet 6 inches from the floor shall be completely enclosed.
Related Code Sections
1910.263(c)(3) Special Industries, Sprockets and V-Belt Drives
Sprockets and V-belt drives located within reach from platforms or passageways or located within 8 feet 6 inches from the floor shall be completely ...
OSHA 1910 General Industry > R Special Industries > 1910.263 Bakery Equipment > 1910.263(c) General Machine Guarding > 1910.263(c)(3) Sprockets and V-Belt Drives
1910.219(f)(3) Machinery and Machine Guarding, Sprockets and Chains
All sprocket wheels and chains shall be enclosed unless they are more than seven (7) feet above the floor or platform. Where the drive extends over ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.219 Mechanical Power-Transmission Apparatus > 1910.219(f) Gears, Sprockets, and Chains > 1910.219(f)(3) Sprockets and Chains
1910.211(f)(1) Machinery and Machine Guarding, Belts
Belts include all power transmission belts, such as flat belts, round belts, V-belts, etc., unless otherwise specified ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.211 Definitions > 1910.211(f) > 1910.211(f)(1) Belts
1910.261(c)(15) Special Industries, Belt Conveyors
All conveyors for pulpwood shall have the inrunning nips between chain and sprockets guarded; also, turning drums ...
OSHA 1910 General Industry > R Special Industries > 1910.261 Pulp, Paper, and Paperboard Mills > 1910.261(c) Handling and Storage of Pulpwood and Pulp Chips > 1910.261(c)(15) Belt Conveyors
1910.213(q)(3) Machinery and Machine Guarding,
Sprockets on chain or slat-belt conveyors shall be enclosed ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.213 Woodworking Machinery Requirements > 1910.213(q) Veneer Cutters and Wringers > 1910.213(q)(3)