// CODE SNIPPET
1910.219(f)(3) Sprockets and Chains
JUMP TO FULL CODE CHAPTER
All sprocket wheels and chains shall be enclosed unless they are more than seven (7) feet above the floor or platform. Where the drive extends over other machine or working areas, protection against falling shall be provided. This subparagraph does not apply to manually operated sprockets.
Related Code Sections
1910.219(f)(3) Machinery and Machine Guarding, Sprockets and Chains
All sprocket wheels and chains shall be enclosed unless they are more than seven (7) feet above the floor or platform. Where the drive extends over ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.219 Mechanical Power-Transmission Apparatus > 1910.219(f) Gears, Sprockets, and Chains > 1910.219(f)(3) Sprockets and Chains
1910.219(f)(1)(ii) Machinery and Machine Guarding,
By a standard guard as described in paragraph (o) of this section, at least seven (7) feet high extending six (6) inches above the mesh point ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.219 Mechanical Power-Transmission Apparatus > 1910.219(f) Gears, Sprockets, and Chains > 1910.219(f)(1) Gears > 1910.219(f)(1)(ii)
1910.219(f)(1)(iii) Machinery and Machine Guarding,
By a band guard covering the face of gear and having flanges extended inward beyond the root of the teeth on the exposed side or sides. Where any ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.219 Mechanical Power-Transmission Apparatus > 1910.219(f) Gears, Sprockets, and Chains > 1910.219(f)(1) Gears > 1910.219(f)(1)(iii)
1910.213(q)(3) Machinery and Machine Guarding,
Sprockets on chain or slat-belt conveyors shall be enclosed ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.213 Woodworking Machinery Requirements > 1910.213(q) Veneer Cutters and Wringers > 1910.213(q)(3)
1910.213(k)(2) Machinery and Machine Guarding,
At the rear ends of frames over which feed conveyors run, sprockets and chains shall be guarded at the sides by plates projecting beyond ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.213 Woodworking Machinery Requirements > 1910.213(k) Tenoning Machines > 1910.213(k)(2)