UpCodes logo
Jump To Full Code Chapter
The spout shall be located 15 inches (380 mm) minimum from the vertical support and 5 inches (125 mm) maximum from the front edge of the unit, including bumpers.
Figure 602.5 Drinking Fountain Spout Location
In plan view, the spout is shown to be 15 inches (380 mm) minimum from the vertical support and 5 inches (125 mm) from the front edge of the unit.

Related Code Sections

602.5 Plumbing Elements and Facilities, Spout Location
The spout shall be located 15 inches (380 mm) minimum from the vertical support and 5 inches (125 mm) maximum from the front edge of the unit ...
206.3 Scoping Requirements, Location
accessible routes shall coincide with or be located in the same area as general circulation paths.  Where circulation paths are interior ...
206.4.4.1 Scoping Requirements, Location
In transportation facilities, where different entrances serve different transportation fixed routes or groups of fixed routes, at least one public ...
208.3 Scoping Requirements, Location
spaces complying with 502 that serve a particular building or facility shall be located on the shortest accessible route from parking to an entrance ...
406.5 Accessible Routes, Location
Curb ramps and the flared sides of curb ramps shall be located so that they do not project into vehicular traffic lanes, parking spaces, or parking ...