UpCodes logo
Jump To Full Code Chapter
The operating speed shall be etched or otherwise permanently marked on all circular saws over 20 inches in diameter or operating at over 10,000 peripheral feet per minute. Any saw so marked shall not be operated at a speed other than that marked on the blade. When a marked saw is retensioned for a different speed, the marking shall be corrected to show the new speed.

Related Code Sections

1926.304(b) Tools - Hand and Power, Speeds
The operating speed shall be etched or otherwise permanently marked on all circular saws over 20 inches in diameter or operating at over 10,000 ...
1926.307(d)(4) Tools - Hand and Power, Pulley Speeds
Pulleys intended to operate at rim speed in excess of manufacturers normal recommendations shall be specially designed and carefully balanced ...