// CODE SNIPPET

E3908.3 Specific Equipment Fastened in Place or Connected by Permanent Wiring Methods

Residential Code 2009 of Tennessee > 39 Power and Lighting Distribution > E3908 Grounding > E3908.3 Specific Equipment Fastened in Place or Connected by Permanent Wiring Methods

JUMP TO FULL CODE CHAPTER

Exposed noncurrent-carrying metal parts of the following equipment and enclosures shall be connected to the equipment grounding conductor:

Luminaires as provided in Chapter 40.
Motor-operated water pumps, including submersible types. Where a submersible pump is used in a metal well casing, the well casing shall be bonded to the pump circuit equipment grounding conductor.

Related Code Sections

250.112 Wiring and Protection, Specific Equipment Fastened in Place (Fixed) or Connected by Permanent Wiring Methods

Permanently mounted electrical equipment and skids shall be connected to the equipment grounding conductor sized as required by 250.122 ...

National Electrical Code 2017 of Tennessee > 2 Wiring and Protection > 250 Grounding and Bonding > 250.112 Specific Equipment Fastened in Place (Fixed) or Connected by Permanent Wiring Methods

(D) Wiring and Protection, Enclosures for Motor Controllers

Enclosures for motor controllers unless attached to ungrounded portable equipment ...

National Electrical Code 2017 of Tennessee > 2 Wiring and Protection > 250 Grounding and Bonding > 250.112 Specific Equipment Fastened in Place (Fixed) or Connected by Permanent Wiring Methods > (D) Enclosures for Motor Controllers

(G) Wiring and Protection, Electric Signs

Electric signs, outline lighting, and associated equipment as provided in 600.7 ...

(F) Wiring and Protection, Garages, Theaters, and Motion Picture Studios

Electrical equipment in commercial garages, theaters, and motion picture studios, except pendant lampholders supplied by circuits not over 150 volts ...