UpCodes logo
Jump To Full Code Chapter
In addition to the training required in paragraphs (a) and (b) of this section, the employer shall provide special training to employees engaged in the following activities.
1926.761(c)(1) Multiple Lift Rigging Procedure
The employer shall ensure that each employee who performs multiple lift rigging has been provided training in the following areas:
1926.761(c)(1)(i)
The nature of the hazards associated with multiple lifts; and
1926.761(c)(1)(ii)
The proper procedures and equipment to perform multiple lifts required by § 1926.753(e).
1926.761(c)(2) Connector Procedures
The employer shall ensure that each connector has been provided training in the following areas:
1926.761(c)(2)(i)
The nature of the hazards associated with connecting; and
1926.761(c)(2)(ii)
The establishment, access, proper connecting techniques and work practices required by § 1926.756(c) and § 1926.760(b).
1926.761(c)(3) Controlled Decking Zone Procedures
Where CDZs are being used, the employer shall assure that each employee has been provided training in the following areas:
1926.761(c)(3)(i)
The nature of the hazards associated with work within a controlled decking zone; and
1926.761(c)(3)(ii)
The establishment, access, proper installation techniques and work practices required by § 1926.760(c) and § 1926.754(e).

[66 FR 5273, Jan. 18, 2001; 73 FR 75589, Dec. 12, 2008]

Related Code Sections

1926.761(c) Steel Erection, Special Training Programs
In addition to the training required in paragraphs (a) and (b) of this section, the employer shall provide special training to employees engaged ...
1926.761(c)(3)(ii) Steel Erection,
The establishment, access, proper installation techniques and work practices required by § 1926.760(c) and § 1926.754(e). [66 FR 5273, Jan. 18 ...