UpCodes logo
Go To Full Code Chapter
Special inspections and tests for high-strength fasteners shall be in accordance with this section, Section 1705A.2.1 and Table 1705A.2.1. High-strength bolts, nuts and washers shall be sampled and tested by an approved agency for conformance with the requirements of applicable ASTM standards [OSHPD 1 & 4] and in accordance with Section 2213A.1.
[DSA-SS, DSA-SS/CC] The minimum requirements for a qualified high-strength bolting special inspector shall be an International Code Council certified Structural Steel and Bolting Special Inspector (S1).

Related Code Sections

1705A.5.1 Special Inspections and Tests, High-Load Diaphragms
High-load diaphragms designed in accordance with Section 2306A.2 shall be installed with special inspections as indicated in Section 1704A.2. The ...