// CODE SNIPPET
1910.1200(f)(4) Solid Materials
Go To Full Code Chapter
For solid metal (such as a steel beam or a metal casting), solid wood, or plastic items that are not exempted as articles due to their downstream use, or shipments of whole grain, the required label may be transmitted to the customer at the time of the initial shipment, and need not be included with subsequent shipments to the same employer unless the information on the label changes;
This exception to requiring labels on every container of hazardous chemicals is only for the solid material itself, and does not apply to hazardous chemicals used in conjunction with, or known to be present with, the material and to which employees handling the items in transit may be exposed (for example, cutting fluids or pesticides in grains).
The label may be transmitted with the initial shipment itself, or with the safety data sheet that is to be provided prior to or at the time of the first shipment; and,
Related Code Sections
1910.1200(f)(4) Toxic and Hazardous Substances, Solid Materials
; This exception to requiring labels on every container of hazardous chemicals is only for the solid material ...
1910.104(b)(3)(x) Hazardous Materials, Highly Combustible Materials
Fifty feet from solid materials which burn rapidly, such as excelsior or paper ...
1910.266(f)(3)(vi) Special Industries,
The overhead covering of each cab shall be of solid material and shall extend over the entire canopy ...
1910.1045(a)(2)(iii) Toxic and Hazardous Substances,
Solid materials made from and/or containing AN which will not be heated above 170 deg. F during handling, use, or processing ...
1910.213(i)(1) Machinery and Machine Guarding,
be either enclosed by solid material or by wire mesh or perforated metal. Such mesh or perforated metal shall be not less than 0.037 inch (U.S. Gage No ...