// CODE SNIPPET

M2301.2.11 Solar Loop

2017 FBC - Residential, 6^th edition > 23 Solar Thermal Energy Systems > M2301 Thermal Solar Energy Systems > M2301.2 Design and Installation > M2301.2.11 Solar Loop

JUMP TO FULL CODE CHAPTER

Solar loops shall be in accordance with Sections M2301.2.11.1 and M2301.2.11.2.

M2301.2.11.1 Solar Loop Isolation

Valves shall be installed to allow the solar collectors to be isolated from the remainder of the system.

M2301.2.11.2 Drain and Fill Valve Labels and Caps

Drain and fill valves shall be labeled with a description and warning that identifies the fluid in the solar loop and a warning that the fluid might be discharged at high temperature and pressure. Drain caps shall be installed at drain and fill valves.

Related Code Sections

M2301.2.11 Solar Thermal Energy Systems, Solar Loop

Solar loops shall be in accordance with Sections M2301.2.11.1 and M2301.2.11.2 ...

2017 FBC - Residential, 6^th edition > 23 Solar Thermal Energy Systems > M2301 Thermal Solar Energy Systems > M2301.2 Design and Installation > M2301.2.11 Solar Loop

M2301.2.8 Solar Energy Systems, Solar Loop Isolation

Valves shall be installed to allow the solar collectors to be isolated from the remainder of the system. Each isolation valve shall be labeled ...

2014 FBC - Residential, 5^th edition > 23 Solar Energy Systems > M2301 Thermal Solar Energy Systems > M2301.2 Installation > M2301.2.8 Solar Loop Isolation

P2902.5.5.1 Water Supply and Distribution, Indirect Systems

Water supplies of any type shall not be connected to the solar heating loop of an indirect solar thermal hot water heating system. This requirement ...

2017 FBC - Residential, 6^th edition > 29 Water Supply and Distribution > P2902 Protection of Potable Water Supply > P2902.5 Protection of Potable Water Connections > P2902.5.5 Solar Thermal Systems > P2902.5.5.1 Indirect Systems

M2301.2.5 Solar Thermal Energy Systems, Piping Insulation

entire solar loop shall be insulated. Where split-style insulation is used, the seam shall be sealed. Fittings shall be fully insulated ...

2017 FBC - Residential, 6^th edition > 23 Solar Thermal Energy Systems > M2301 Thermal Solar Energy Systems > M2301.2 Design and Installation > M2301.2.5 Piping Insulation

Section M2301 Solar Thermal Energy Systems, Thermal Solar Energy Systems

systems, pressure relief valves in solar loops shall comply with SRCC 300. System components shall have a working pressure rating of not less than ...

2017 FBC - Residential, 6^th edition > 23 Solar Thermal Energy Systems > M2301 Thermal Solar Energy Systems

Calculate Code Requirements

Code Calculators automatically generate a detailed list of requirements.

Upgrade to premium to access these features.

LEARN MORE

About UpCodes

UpCodes provides an intuitive resource to navigate building regulations.

Codes are organized by jurisdiction to help you understand which regulations apply to your project.

Find Your Codes