// CODE SNIPPET
3.3.22 Small Room
JUMP TO FULL CODE CHAPTER
A compartment of light hazard occupancy classification having unobstructed construction and a floor area not exceeding 800 ft2 (74 m2).
Related Code Sections
3.3.21 Definitions, Small Room
A compartment of light hazard occupancy classification having unobstructed construction and a floor area not exceeding 800 ft 2 (74.3 m 2 ...
Standard for the Installation of Sprinkler Systems 2013 of New York State > 3 Definitions > 3.3 General Definitions > 3.3.21 Small Room
3.3.22 Definitions, Small Room
A compartment of light hazard occupancy classification having unobstructed construction and a floor area not exceeding 800 ft 2 (74 m 2 ...
Standard for the Installation of Sprinkler Systems 2016 of New York State > 3 Definitions > 3.3 General Definitions > 3.3.22 Small Room
8.6.2.1.2 Installation Requirements,
The requirements of 8.6.2.1.1 shall not apply in a small room as defined in 3.3.22 ...
Standard for the Installation of Sprinkler Systems 2016 of New York State > 8 Installation Requirements > 8.6 Standard Pendent and Upright Spray Sprinklers > 8.6.2 Protection Areas Per Sprinkler (Standard Pendent and Upright Spray Sprinklers) > 8.6.2.1 Determination of Protection Area of Coverage > 8.6.2.1.2
8.6.2.1.2 Installation Requirements,
The requirements of 8.6.2.1.1 shall not apply in a small room as defined in 3.3.21 ...
Standard for the Installation of Sprinkler Systems 2013 of New York State > 8 Installation Requirements > 8.6 Standard Pendent and Upright Spray Sprinklers > 8.6.2 Protection Areas Per Sprinkler (Standard Pendent and Upright Spray Sprinklers) > 8.6.2.1 Determination of Protection Area of Coverage > 8.6.2.1.2
23.4.4.8.3 Plans and Calculations,
Sprinklers with different K-factors shall be acceptable for special use such as exposure protection, small rooms or enclosures, or directional ...
Standard for the Installation of Sprinkler Systems 2013 of New York State > 23 Plans and Calculations > 23.4 Hydraulic Calculation Procedures > 23.4.4* Calculation Procedure > 23.4.4.8* Orifice Plates > 23.4.4.8.3