// CODE SNIPPET
1926.652(f) Sloping and Benching Systems
JUMP TO FULL CODE CHAPTER
Employees shall not be permitted to work on the faces of sloped or benched excavations at levels above other employees except when employees at the lower levels are adequately protected from the hazard of falling, rolling, or sliding material or equipment.
Related Code Sections
1926.652(f) Excavations, Sloping and Benching Systems
Employees shall not be permitted to work on the faces of sloped or benched excavations at levels above other employees except when employees ...
OSHA 1926 Construction > P Excavations > 1926.652 Requirements for Protective Systems > 1926.652(f) Sloping and Benching Systems
1926.652(b)(1)(i) Excavations,
Excavations shall be sloped at an angle not steeper than one and one-half horizontal to one vertical (34 degrees measured from the horizontal ...
OSHA 1926 Construction > P Excavations > 1926.652 Requirements for Protective Systems > 1926.652(b) Design of Sloping and Benching Systems > 1926.652(b)(1) Option (1)-Allowable Configurations and Slopes > 1926.652(b)(1)(i)
1926.652(b)(1)(ii) Excavations,
Slopes specified in paragraph (b)(1)(i) of this section, shall be excavated to form configurations that are in accordance with the slopes shown ...
OSHA 1926 Construction > P Excavations > 1926.652 Requirements for Protective Systems > 1926.652(b) Design of Sloping and Benching Systems > 1926.652(b)(1) Option (1)-Allowable Configurations and Slopes > 1926.652(b)(1)(ii)
1926.652(b)(4)(i) Excavations,
Sloping and benching systems not utilizing Option (1) or Option (2) or Option (3) under paragraph (b) of this section shall be approved ...
OSHA 1926 Construction > P Excavations > 1926.652 Requirements for Protective Systems > 1926.652(b) Design of Sloping and Benching Systems > 1926.652(b)(4) Option (4)-Design by a Registered Professional Engineer > 1926.652(b)(4)(i)
1926.652(b)(4)(ii)(A) Excavations,
The magnitude of the slopes that were determined to be safe for the particular project; ...
OSHA 1926 Construction > P Excavations > 1926.652 Requirements for Protective Systems > 1926.652(b) Design of Sloping and Benching Systems > 1926.652(b)(4) Option (4)-Design by a Registered Professional Engineer > 1926.652(b)(4)(ii) > 1926.652(b)(4)(ii)(A)