// CODE SNIPPET
608.2.1 Sleeping Unit Bathroom Controls
Go To Full Code Chapter
Permanently wired luminaires located in bathrooms within sleeping units in Group R-1 and R-2 occupancies shall be equipped with occupant sensors that require manual intervention to energize circuits.
Exception:
Not more than 5 watts of lighting in each bathroom shall be permitted to be connected to the captive key control at the main room entry instead of being connected to the occupant sensor control.
Related Code Sections
608.2.1 ENERGY CONSERVATION, EFFICIENCY AND CO2e EMISSION REDUCTION, Sleeping Unit Bathroom Controls
Permanently wired luminaires located in bathrooms within sleeping units in Group R-1 and R-2 occupancies shall be equipped with occupant sensors ...
915.2.2 Fire Protection Systems, Sleeping Units
of each separate sleeping area in the immediate vicinity of the sleeping unit where the sleeping unit or its attached bathroom does not contain a fuel ...
915.2.2 Fire Protection and Life Safety Systems, Sleeping Units
of each separate sleeping area in the immediate vicinity of the sleeping unit where the sleeping unit or its attached bathroom does not contain a fuel ...
903.3.1.1.2 Fire Protection and Life Safety Systems, Bathrooms
individual dwelling units or sleeping units, provided that walls and ceilings, including the walls and ceilings behind a shower enclosure or tub ...
903.3.1.1.2 Fire Protection Systems, Bathrooms
) in area and are located within individual dwelling units or sleeping units, provided that walls and ceilings, including the walls and ceilings behind ...