UpCodes logo
Go To Full Code Chapter
A slasher is a machine used for applying a size mixture to warp yarns. Essentially, it consists of a stand for holding section beams, a size box, one or more cylindrical dryers or an enclosed hot air dryer, and a beaming end for finding the yarn on the loom beams.

Related Code Sections

1910.262(b)(34) Special Industries, Slasher
A slasher is a machine used for applying a size mixture to warp yarns. Essentially, it consists of a stand for holding section beams, a size box, one ...
1910.261(e)(2) Special Industries, Slasher Tables
Saws shall be stopped and power switches shall be locked out and tagged whenever it is necessary for any person to be on the slasher table ...
1910.262(h)(1)(iii) Special Industries, Lever Control
When slashers are operated by control levers, these levers shall be connected to a horizontal bar or treadle located not more than 69 inches above ...
1910.262(h)(1)(iv) Special Industries, Pushbutton Control
Slashers operated by pushbutton control shall have stop and start buttons located at each end of the machine, and additional buttons located on both ...