// CODE SNIPPET
1217.5.1 Slab Penetration Tube and Joint Protection
JUMP TO FULL CODE CHAPTER
Where embedded in or installed under a concrete slab, tubing shall be protected from damage at penetrations of the slab with protective sleeving approved by the tubing manufacturer. The space between the tubing and sleeve shall be sealed with an approved sealant compatible with the tubing. The tubing at the location of an expansion joint in a concrete slab shall be encased in protective pipe sleeving that covers the tubing not less than 12 inches (305 mm) on either side of the expansion joint or the tubing shall be installed below the slab.
Related Code Sections
1217.5.1 Hydronics, Slab Penetration Tube and Joint Protection
Where embedded in or installed under a concrete slab, tubing shall be protected from damage at penetrations of the slab with protective sleeving ...
Uniform Mechanical Code 2018 of Nevada > 12 Hydronics > 1217.0 Radiant Heating and Cooling > 1217.5 Poured Floor Structural Concrete Slab Systems (Thermal Mass) > 1217.5.1 Slab Penetration Tube and Joint Protection
1220.2.3 Hydronics, Slab Penetration Tube and Joint Protection
Where embedded in or installed under a concrete slab, tubing shall be protected from damage at penetrations of the slab with protective sleeving ...
Uniform Mechanical Code 2018 of Nevada > 12 Hydronics > 1220.0 Auxiliary Systems > 1220.2 Snow and Ice Melt Controls > 1220.2.3 Slab Penetration Tube and Joint Protection
609.3 Water Supply and Distribution, Under Concrete Slab
to be wrapped.
Copper or copper alloy tubing shall be installed without joints where possible. Where joints are permitted, they shall be brazed, and fittings ...
Uniform Plumbing Code 2018 of Nevada > 6 Water Supply and Distribution > 609.0 Installation, Testing, Unions, and Location > 609.3 Under Concrete Slab
707.8 Fire and Smoke Protection Features, Joints
Joints made in or between fire barriers , and joints made at the intersection of fire barriers with underside of a fire-resistance-rated floor ...
Building Code 2018 of Nevada > 7 Fire and Smoke Protection Features > 707 Fire Barriers > 707.8 Joints
707.8 Fire and Smoke Protection Features, Joints
Joints made in or between fire barriers , and joints made at the intersection of fire barriers with underside of a fire-resistance rated floor ...
Building Code 2012 of Nevada > 7 Fire and Smoke Protection Features > 707 Fire Barriers > 707.8 Joints