// CODE SNIPPET
722.2.3.1 Slab Cover
Go To Full Code Chapter
The minimum thickness of concrete cover to the positive moment reinforcement shall comply with Table 722.2.3(1) for reinforced concrete and Table 722.2.3(2) for prestressed concrete. These tables are applicable for solid or hollow-core one-way or two-way slabs with flat undersurfaces. These tables are applicable to slabs that are either cast in place or precast. For precast prestressed concrete not covered elsewhere, the procedures contained in PCI 124 shall be acceptable.
Upcodes Diagrams
Related Code Sections
722.2.3.1 Fire and Smoke Protection Features, Slab Cover
are applicable to slabs that are either cast in place or precast. For precast prestressed concrete not covered elsewhere, the procedures contained ...
722.2.3.1 Fire and Smoke Protection Features, Slab Cover
are applicable to slabs that are either cast in place or precast. For precast prestressed concrete not covered elsewhere, the procedures contained ...
8.7.7.1.1 Two-Way Slabs,
The overall height of the shear stud assembly shall be at least the thickness of the slab minus the sum of (a) through (c): (a) Concrete cover ...
A6.1 Normative Appendix A Rated R-Value of Insulation and Assembly U-factor, C-Factor, and F-Factor Determinations, General
of the slab and along the entire perimeter and completely covers the entire area under the slab ...
8.7.7.1.1 Two-Way Slabs,
The overall height of the shear stud assembly shall be at least the thickness of the slab minus the sum of (a) through (c): (a) Concrete cover ...