// CODE SNIPPET
1910.180(h)(1) Size the Load
Go To Full Code Chapter
1910.180(h)(1)(i)
No crane shall be loaded beyond the rated load, except for test purposes as provided in paragraph (e) of this section.
1910.180(h)(1)(ii)
When loads which are limited by structural competence rather than by stability are to be handled, it shall be ascertained that the weight of the load has been determined within plus or minus 10 percent before it is lifted.
Upcodes Diagrams
Related Code Sections
1910.179(n)(1) Materials Handling and Storage, Size of Load
The crane shall not be loaded beyond its rated load except for test purposes as provided in paragraph (k) of this section ...
1910.180(h)(1) Materials Handling and Storage, Size the Load
No crane shall be loaded beyond the rated load, except for test purposes as provided in paragraph (e) of this section ...
1910.181(i)(1) Materials Handling and Storage, Size of Load
No derrick shall be loaded beyond the rated load ...
1910.183(h) Materials Handling and Storage, Load Safety
The size and weight of loads, and the manner in which loads are connected to the helicopter shall be checked. A lift may not be made ...
1910.111(d)(9)(i) Hazardous Materials,
A minimum of two compressors shall be provided either of which shall be of sufficient size to handle the loads listed in paragraphs (d)(8)(i ...