UpCodes logo
Go To Full Code Chapter
An individual vent for a single appliance shall have a cross-sectional area equal to or greater than the area of the connector to the appliance, but not less than 7 square inches (4515 mm2) except where the vent is an integral part of a listed and labeled appliance.

Related Code Sections

M1804.3.1 Chimneys and Vents, Size of Single-Appliance Venting Systems
An individual vent for a single appliance shall have a cross-sectional area equal to or greater than the area of the connector to the appliance ...
503.5.5 Chimneys and Vents, Size of Chimneys
chimney venting system for a single appliance with a draft hood, the effective areas of the vent connector and chimney flue shall be not less than ...
G2427.5.4 Fuel Gas, (503.5.5) Size of Chimneys
chimney venting system for a single appliance with a draft hood, the effective areas of the vent connector and chimney flue shall be not less than ...
801.6 Chimneys and Vents, Minimum Size of Chimney or Vent
Except as otherwise provided for in this chapter, the size of the chimney or vent, serving a single appliance, except engineered systems, shall have ...
801.6 Chimneys and Vents, Minimum Size of Chimney or Vent
Except as otherwise provided for in this chapter, the size of the chimney or vent, serving a single appliance, except engineered systems, shall have ...