// CODE SNIPPET
413.3 Size of Floor Drains
Related Code Sections
413.3 Fixtures, Faucets and Fixture Fittings, Size of Floor Drains
Floor drains shall have a drain outlet not less than 2 inches (51 mm) in diameter ...
Plumbing Code 2018 of Kansas > 4 Fixtures, Faucets and Fixture Fittings > 413 Floor and Trench Drains > 413.3 Size of Floor Drains
504.7.2 Water Heaters, Pan Drain Termination
The pan drain shall extend full size and terminate over a suitably located indirect waste receptor or floor drain or extend to the exterior ...
Plumbing Code 2018 of Kansas > 5 Water Heaters > 504 Safety Devices > 504.7 Required Pan > 504.7.2 Pan Drain Termination
22.214.171.124* Installation Requirements, System, Main Drain, or Sectional Drain Connections
Drain connections for systems supply risers and mains shall be sized as shown in Table 126.96.36.199.2. Table 188.8.131.52.2 Drain Size ...
Standard for the Installation of Sprinkler Systems 2016 of Kansas > 8 Installation Requirements > 8.16 Piping Installation > 8.16.2 Drainage > 184.108.40.206* System, Main Drain, or Sectional Drain Connections
P3005.4 Sanitary Drainage, Drain Pipe Sizing
Drain pipes shall be sized according to drainage fixture unit (d.f.u.) loads. The size of the drainage piping shall not be reduced in size ...
Residential Code 2018 of Kansas > 30 Sanitary Drainage > P3005 Drainage System > P3005.4 Drain Pipe Sizing