// CODE SNIPPET
416.3.6 Size of Fittings, Pipe and Openings
Related Code Sections
416.3.6 Gas Piping Installations, Size of Fittings, Pipe and Openings
The fittings, pipe and openings located between the system to be protected and the pressure-relieving device shall be sized to prevent hammering ...
Fuel Gas Code 2018 of Kansas > 4 Gas Piping Installations > 416 (IFGS) Overpressure Protection Devices > 416.3 Overpressure Protection Devices > 416.3.6 Size of Fittings, Pipe and Openings
6.4.7 System Components and Hardware, Reducers and Bushings
Unless the requirements of 6.4.7.2 or 6.4.7.3 are met, a one-piece reducing fitting shall be used wherever a change is made in the size of the pipe ...
Standard for the Installation of Sprinkler Systems 2016 of Kansas > 6 System Components and Hardware > 6.4 Fittings > 6.4.7 Reducers and Bushings
9.3.3* Hanging, Bracing, and Restraint of System Piping, Seismic Separation Assembly
assemblies shall consist of flexible fittings or flexible piping so as to allow movement sufficient to accommodate closing of the separation, opening ...
Standard for the Installation of Sprinkler Systems 2016 of Kansas > 9 Hanging, Bracing, and Restraint of System Piping > 9.3 Protection of Piping Against Damage Where Subject to Earthquakes > 9.3.3* Seismic Separation Assembly
6.5.2.3 System Components and Hardware, Fittings
When the pipe size in a run of piping is reduced, a reducing fitting designed ...
Standard for the Installation of Sprinkler Systems 2016 of Kansas > 6 System Components and Hardware > 6.5 Joining of Pipe and Fittings > 6.5.2 Welded Pipe and Fittings > 6.5.2.3 Fittings
Section 426 Fixtures, Faucets and Fixture Fittings, Whirlpool Bathtubs
Where the manufacturer's instructions do not specify the location and minimum size of field-fabricated access openings, an opening not less than 12 ...