// CODE SNIPPET
3308.6.2.5 Size of Debris Net Openings
Go To Full Code Chapter
Section 6.6 of ANSI/ASSP A10.11
shall be amended by adding a new sentence at the end of the section, as follows, "However,
in no case shall the largest opening area for debris netting when used horizontally be larger
than 1/2 square inch (323 mm2
), with no opening larger than 1/2 inch (13 mm2
) in the
vertical or horizontal dimensions and 3/4 inch (19 mm) in any other dimension."
Upcodes Diagrams
Related Code Sections
3308.6.2.5 Safeguards During Construction or Demolition, Size of Debris Net Openings
the largest opening area for debris netting when used horizontally be larger than 1/2 square inch (12.7 mm2)." ...
3308.6.2.5 Safeguards During Construction or Demolition, Size of Debris Net Openings
the largest opening area for debris netting when used horizontally be larger
than 1/2 square inch (323 mm2
), with no opening larger than 1/2 inch (13 mm2 ...
3314.8.2 Safeguards During Construction or Demolition, Debris Netting
Where required by Section 3314.8, the scaffold shall be enclosed with a debris netting consisting of a wire screen comprised of not less than number ...
3314.8.2 Safeguards During Construction or Demolition, Debris Netting
Where required by Section 3314.8, the scaffold shall be enclosed with
a debris netting consisting of a wire screen comprised of not less than number ...
3308.3 Safeguards During Construction or Demolition, Vertical Safety Netting Requirements
safety netting shall be of a fine mesh of a size and strength sufficient to contain falling tools and materials. Wall opening screens, grills ...