// CODE SNIPPET
610.9 Size of Branches
JUMP TO FULL CODE CHAPTER
Where Table 610.4 is used, the minimum
size of each branch shall be determined by the total fixture
units served by that branch and then following the steps in
Section 610.8. No branch piping shall exceed the total demand
in fixture units for the system computed from Table 610.3.
Related Code Sections
610.9 Water Supply and Distribution, Size of Branches
Where Table 610.4 is used, the
minimum size of each branch shall be determined by the
number of fixture units to be served by that branch, the
total ...
California Plumbing Code 2016 > 6 Water Supply and Distribution > 610.0 Size of Potable Water Piping > 610.9 Size of Branches
610.9 Water Supply and Distribution, Size of Branches
Where Table 610.4 is used, the minimum
size of each branch shall be determined by the total fixture
units served by that branch and then following ...
California Plumbing Code 2019 > 6 Water Supply and Distribution > 610.0 Size of Potable Water Piping > 610.9 Size of Branches
911.3 Vents, Slope and Size of Horizontal Branch
section of the horizontal branch drain shall be sized for the total drainage discharge to the branch ...
California Plumbing Code 2019 > 9 Vents > 911.0 Circuit Venting > 911.3 Slope and Size of Horizontal Branch
911.3 Vents, Slope and Size of Horizontal Branch
section of the horizontal branch drain shall be
sized for the total drainage discharge to the branch ...
California Plumbing Code 2016 > 9 Vents > 911.0 Circuit Venting > 911.3 Slope and Size of Horizontal Branch
A106.0 Recommended Rules for Sizing the Water Supply System, Size of Principal Branches and Risers
The required size of branches and risers shall
be permitted to be obtained in the same manner as the building
supply, by obtaining the demand load ...
California Plumbing Code 2019 > A Recommended Rules for Sizing the Water Supply System > A106.0 Size of Principal Branches and Risers