UpCodes logo
Go To Full Code Chapter
  1. Standard roll-in shower compartments. Standard roll-in shower compartments shall meet one of the following:
    1. 30 inches (762 mm) minimum in depth and 60 inches (1524 mm) minimum in width between wall surfaces measured at center points of opposing sides, with a full opening width on the long side.
      A clear floor space 30 inches (914 mm) minimum by 60 inches (1524 mm) minimum shall be provided adjacent to the open face of the shower compartment.
    2. 42 inches (1067 mm) in width between wall surfaces, and 48 inches (1219 mm) minimum in depth with an entrance opening of 42 inches (1067 mm).
  2. Alternate roll-in shower compartments. Alternate roll-in shower compartments shall be 36 inches (914 mm) minimum in depth and 60 inches (1524 mm) minimum in width between wall surfaces measured at center points of opposing sides. A 36-inch (914 mm) wide minimum entry shall be provided at one end of the long side of the compartment.

Related Code Sections

1127A.5.3.1 Housing Accessibility, Size and Clearance
Standard roll-in shower compartments. Standard roll-in shower compartments shall meet one of the following: 1.1 30 inches (762 mm) minimum in depth ...
1127A.5.3.1 Housing Accessibility, Size and Clearance
Standard roll-in shower compartments. Standard roll-in shower compartments shall meet one of the following: 30 inches (762 mm) minimum in depth ...