// CODE SNIPPET
803.10 Site-Fabricated Stretch Systems
JUMP TO FULL CODE CHAPTER
Where used as interior wall or interior ceiling finish materials, site-fabricated stretch systems containing all three components described in the definition in Chapter 2 shall be tested in the manner intended for use, and shall comply with the requirements of Section 803.1.1 or 803.1.2. If the materials are tested in accordance with ASTM E84 or UL 723, specimen preparation and mounting shall be in accordance with ASTM E2573.
Related Code Sections
803.10 Interior Finishes, Site-Fabricated Stretch Systems
Where used as interior wall or interior ceiling finish materials, site-fabricated stretch systems containing all three components described ...
Building Code 2018 of Illinois > 8 Interior Finishes > 803 Wall and Ceiling Finishes > 803.10 Site-Fabricated Stretch Systems
418.104.22.168.1 Special Detailed Requirements Based on Occupancy and Use, Fabrication Areas
A gas detection system shall be provided in fabrication areas where HPM gas is used in the fabrication area ...
Building Code 2018 of Illinois > 4 Special Detailed Requirements Based on Occupancy and Use > 415 Groups H-1, H-2, H-3, H-4 and H-5 > 415.11 Group H-5 > 415.11.7 Gas Detection Systems > 422.214.171.124 Where Required > 4126.96.36.199.1 Fabrication Areas
2702.2.15 Electrical, Semiconductor Fabrication Facilities
Emergency power shall be provided for semiconductor fabrication facilities as required in Section 415.11.10 ...
Building Code 2018 of Illinois > 27 Electrical > 2702 Emergency and Standby Power Systems > 2702.2 Where Required > 2702.2.15 Semiconductor Fabrication Facilities
1607.15.1 Structural Design, Fabric Partitions
Fabric partitions that exceed 6 feet (1829 mm) in height, including their finish materials, shall have adequate strength and stiffness to resist ...
Building Code 2018 of Illinois > 16 Structural Design > 1607 Live Loads > 1607.15 Interior Walls and Partitions > 1607.15.1 Fabric Partitions
1704.2.5.1 Special Inspections and Tests, Fabricator Approval
Special inspections during fabrication are not required where the work is done on the premises of a fabricator approved to perform such work ...
Building Code 2018 of Illinois > 17 Special Inspections and Tests > 1704 Special Inspections and Tests, Contractor Responsibility and Structural Observation > 1704.2 Special Inspections and Tests > 1704.2.5 Special Inspection of Fabricated Items > 1704.2.5.1 Fabricator Approval