// CODE SNIPPET
Section 418 Sinks
JUMP TO FULL CODE CHAPTER
Sinks shall conform to ANSI Z124.6, ASME A112.19.1/CSA B45.2, ASME A112.19.2/CSA B45.1 or ASME A112.19.3/CSA B45.4.
Moveable sink systems shall comply with ASME A112.19.12.
Related Code Sections
Section 418 Fixtures, Faucets and Fixture Fittings, Sinks
Sinks shall conform to ANSI Z124.6, ASME A112.19.1/CSA B45.2, ASME A112.19.2/CSA B45.1 or ASME A112.19.3/CSA B45.4 ...
Section 422 Fixtures, Faucets and Fixture Fittings, Sinks
Sinks shall conform to ASME A112.19.1/CSA B45.2, ASME A112.19.2/CSA B45.1, ASME A112.19.3/CSA B45.4 or CSA B45.5/IAPMO Z124 ...
Section P2714 Plumbing Fixtures, Sinks
Sinks shall be provided with waste outlets not less than 1 1 / 2 inches (38 mm) in diameter. A strainer, crossbar or other device shall be provided ...
Georgia State Minimum Standard One and Two Family Dwelling Code > 27 Plumbing Fixtures > P2714 Sinks
(2) Equipment for General Use, Under Sinks
Receptacles shall not be installed in a face-up position in the area below a sink ...
Georgia State Minimum Standard Electrical Code > 4 Equipment for General Use > 406 Receptacles, Cord Connectors, and Attachment Plugs (Caps) > 406.5 Receptacle Mounting > (G) Receptacle Orientation > (2) Under Sinks
422.6 Fixtures, Faucets and Fixture Fittings, Clinical Sink
A clinical sink shall have an integral trap in which the upper portion of a visible trap seal provides a water surface. The fixture shall be designed ...
Georgia State Minimum Standard Plumbing Code > 4 Fixtures, Faucets and Fixture Fittings > 422 Health Care Fixtures and Equipment > 422.6 Clinical Sink