// CODE SNIPPET
(1) Single-Phase Line-To-Neutral Power Sources
Related Code Sections
(1) Special Conditions, Single-Phase Line-To-Neutral Power Sources
Where not elsewhere required or permitted in this Code, the ampacity of a neutral conductor to which a single-phase line-to-neutral power source ...
National Electrical Code 2020 of Minnesota > 7 Special Conditions > 705 Interconnected Electric Power Production Sources > 705.28 Circuit Sizing and Current > (C) Neutral Conductors > (1) Single-Phase Line-To-Neutral Power Sources
(A) Wiring and Protection, Maximum Voltage — 300-Volt Type
between conductors Single-phase line-to-neutral circuits supplied from a 3-phase, 4-wire, solidly grounded neutral source where the line-to-neutral ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 240 Overcurrent Protection > 240.60 General > (A) Maximum Voltage — 300-Volt Type
(B) Special Occupancies, Neutral Terminal
, in an approved manner, from use with a balanced 3-phase, 4-wire with ground supply to a balanced single-phase, 3-wire with ground supply, the supply neutral ...
National Electrical Code 2020 of Minnesota > 5 Special Occupancies > 520 Theaters, Audience Areas of Motion Picture and Television Studios, Performance Areas, and Similar Locations > 520.53 Construction > (B) Neutral Terminal
710.15 Special Conditions, General
systems fed by stand-alone or isolated microgrid power sources shall be permitted to have less capacity than the calculated load. The capacity ...
National Electrical Code 2020 of Minnesota > 7 Special Conditions > 710 Stand-Alone Systems > 710.15 General
(E) Wiring Methods and Materials, Neutral Conductor
circuit consisting of two phase conductors and the neutral conductor of a 4-wire, 3-phase, wye-connected system, a common conductor carries ...
National Electrical Code 2020 of Minnesota > 3 Wiring Methods and Materials > 310 Conductors for General Wiring > 310.15 Ampacity Tables > (E) Neutral Conductor