// CODE SNIPPET
P3111.1.1 Single-Fixture Systems
JUMP TO FULL CODE CHAPTER
A horizontal fixture drain shall be considered to be a combination waste and vent system provided that the fixture drain size complies with Table P3111.3.
Related Code Sections
P3111.1.1 Vents, Single-Fixture Systems
A horizontal fixture drain shall be considered to be a combination waste and vent system provided that the fixture drain size complies with Table ...
Residential Code 2018 of Kansas > 31 Vents > P3111 Combination Waste and Vent System > P3111.1 Type of Fixtures > P3111.1.1 Single-Fixture Systems
E3401.2 General Requirements, Scope
shall be limited to 120/240-volt, 0- to 400-ampere, single-phase systems. These chapters specifically cover the equipment, fixtures, appliances, wiring ...
Section 917 Vents, Single-Stack Vent System
A drainage stack shall serve as a single-stack vent system where sized and installed in accordance with Sections 917.2 through 917.9. The drainage ...
715.2.1 Sanitary Drainage, Fixtures
Gravity-type fixtures installed in vacuum drainage systems shall comply with Chapter 4 ...
Plumbing Code 2018 of Kansas > 7 Sanitary Drainage > 715 Vacuum Drainage Systems > 715.2 System Design > 715.2.1 Fixtures
1002.1 Traps, Interceptors and Separators, Fixture Traps
with the manufacturer's installation instructions shall be permitted to serve as the trap for a single fixture or a combination sink of not more than ...
Plumbing Code 2018 of Kansas > 10 Traps, Interceptors and Separators > 1002 Trap Requirements > 1002.1 Fixture Traps