// CODE SNIPPET
1030.13.2.2 Single Access
Go To Full Code Chapter
For rows of seating served by an aisle or doorway at only one end of the row, the minimum clear width of 12 inches (305 mm) between rows shall be increased by 0.6 inch (15.2 mm) for every additional seat beyond seven seats where seats have backrests or beyond 10 where seats are without backrests. The minimum clear width is not required to exceed 22 inches (559 mm).
Exception: For smoke-protected or open-air assembly seating, the row length limits for a 12-inch-wide (305 mm) aisle accessway, beyond which the aisle accessway minimum clear width shall be increased, are in Table 1030.13.2.1.
Upcodes Diagrams
Related Code Sections
1029.13.2.2 Means of Egress, Single Access
For rows of seating served by an aisle or doorway at only one end of the row, the minimum clear width of 12 inches (305 mm) between rows shall ...
1030.13.2.2 Means of Egress, Single Access
For rows of seating served by an aisle or doorway at only one end of the row, the minimum clear width of 12 inches (305 mm) between rows shall ...
2.2.6.1 Electric Elevators,
of a single access door, the stop switch for each elevator shall be located adjacent to the nearest point of access to its pit from the access door ...
907.5.2.3.3.1 Fire Protection and Life Safety Systems, Wired Equipment
notification appliances, and a single access point to such circuits shall be available on every story. Such circuits shall not be required to be extended ...
1104.5 Accessibility, Location
to be interior. A single accessible route is permitted to pass through a kitchen or storage room in an Accessible unit, Type A unit or Type B unit ...