// CODE SNIPPET
2308.12.9 Sill Plate Anchorage in Seismic Design Category E
Go To Full Code Chapter
In structures assigned to Seismic Design Category E, steel bolts with a minimum nominal diameter of 5/8 inch (15.9 mm) or approved anchor straps load rated in accordance with Section 1711.1 and spaced to provide equivalent anchorage shall be used.
Upcodes Diagrams
Related Code Sections
2308.12.9 Wood, Sill Plate Anchorage in Seismic Design Category E
In structures assigned to Seismic Design Category E, steel bolts with a minimum nominal diameter of 5/8 inch (15.9 mm) or approved anchor straps load ...
2308.3.1.2 Wood, Braced Wall Line Sill Plate Anchorage in Seismic Design Category E
Sill plates along braced wall lines in buildings assigned to Seismic Design Category E shall be anchored with not less than 5/8-inch diameter (15.9 ...
R403.1.6 Foundations, Foundation Anchorage
structures in Seismic Design Categories D0, D1 and D2 and wood light-frame townhouses in Seismic Design Category C. Plate washers conforming to Section ...
R403.1.6 Foundations, Foundation Anchorage
in Seismic Design Category C. Plate washers conforming to Section R602.11.1 shall be provided for all anchor bolts over the full length of required ...
R602.11.1 Wall Construction, Wall Anchorage for All Buildings in Seismic Design Categories D0, D1 and D2 and Townhouses in Seismic Design Category C
Plate washers, a minimum of 0.229 inch by 3 inches by 3 inches (5.8 mm by 76 mm by 76 mm) in size, shall be provided between the foundation sill ...