// CODE SNIPPET
22.214.171.124.2 Signal Verification
JUMP TO FULL CODE CHAPTER
Related Code Sections
126.96.36.199.2 Supervising Station Alarm Systems, Signal Verification
Signal verification shall be by signal repetition, digital parity check, or other approved means ...
National Fire Alarm and Signaling Code 2019 of Maine > 26 Supervising Station Alarm Systems > 26.6 Communications Methods for Supervising Station Alarm Systems > 26.6.4 Digital Alarm Communicator Systems > 188.8.131.52 Digital Alarm Communicator Transmitter (DACT) > 184.108.40.206.2 Signal Verification
26.2.2* Supervising Station Alarm Systems, Fire Alarm Signal Verification
to reporting them to the communications center only where all the following conditions exist: *Alarm signal verification is required ...
National Fire Alarm and Signaling Code 2019 of Maine > 26 Supervising Station Alarm Systems > 26.2 General > 26.2.2* Fire Alarm Signal Verification
220.127.116.11.1.1 Fire Protection Systems,
One hundred percent of all units shall be tested upon initial installation or reacceptance with verification of receipt of signal at the control ...
Fire Code 2018 of Maine > 13 Fire Protection Systems > 13.6 Portable Fire Extinguishers > 13.6.4 Inspection, Maintenance, and Recharging > 18.104.22.168 Electronic Monitoring System Maintenance > 22.214.171.124.1 Electronic Monitoring > 126.96.36.199.1.1
3.3.264 Definitions, Signal Transmission Sequence
A DACT that obtains dial tone, dials the number(s) of the DACR, obtains verification that the DACR is ready to receive signals, transmits the signals ...
National Fire Alarm and Signaling Code 2019 of Maine > 3 Definitions > 3.3 General Definitions > 3.3.264 Signal Transmission Sequence