// CODE SNIPPET
14.4.10.1 Signal Level Testing
JUMP TO FULL CODE CHAPTER
Signal level testing shall be conducted to verify the signal strengths as required in 24.5.2.3 at the following times:
- Initial assessment of radio coverage in accordance with 24.5.2.2.1 and 24.5.2.2.2 for new or existing buildings
- After installation or modification of public safety radio enhancement system needed to ensure compliance with 24.5.2.2.3
- On an annual basis or other interval as specified by the authority having jurisdiction
Related Code Sections
14.4.10.1 Inspection, Testing, and Maintenance, Signal Level Testing
Signal level testing shall be conducted to verify the signal strengths as required in 24.5.2.3 at the following times: Initial assessment of radio ...
National Fire Alarm and Signaling Code 2013 of Colorado > 14 Inspection, Testing, and Maintenance > 14.4 Testing > 14.4.10* In-Building Emergency Radio Communication Systems > 14.4.10.1 Signal Level Testing
24.4.3.15 Emergency Communications Systems (ECS), Volume Control
volume setting that has been established through testing and acceptance of sound level and speech intelligibility as required by this Code ...
National Fire Alarm and Signaling Code 2013 of Colorado > 24 Emergency Communications Systems (ECS) > 24.4 One-Way Emergency Communications Systems > 24.4.3* In-Building Mass Notification Systems > 24.4.3.15 Volume Control
407.4.9.2.2 Accessible Routes, Signal Level
The verbal annunciator shall be 10 dBA minimum above ambient, but shall not exceed 80 dBA, measured at the annunciator ...
Accessible and Usable Buildings and Facilities 2009 of Colorado > 4 Accessible Routes > 407 Elevators > 407.4 Elevator Car Requirements > 407.4.9 Car Position Indicators > 407.4.9.2 Audible Indicators > 407.4.9.2.2 Signal Level
26.3.8.5 Supervising Station Alarm Systems, Test Signals
All test signals received shall be recorded to indicate date, time, and type ...
National Fire Alarm and Signaling Code 2013 of Colorado > 26 Supervising Station Alarm Systems > 26.3 Central Station Service Alarm Systems > 26.3.8 Disposition of Signals > 26.3.8.5 Test Signals
14.4.10.4* Inspection, Testing, and Maintenance, Measurement Parameters
Signal levels shall be measured to ensure the system meets the criteria of 24.5.2.3 according to parameters as directed by the authority having ...
National Fire Alarm and Signaling Code 2013 of Colorado > 14 Inspection, Testing, and Maintenance > 14.4 Testing > 14.4.10* In-Building Emergency Radio Communication Systems > 14.4.10.4* Measurement Parameters