// CODE SNIPPET
1321.9.3 Short Sections of Copper
Go To Full Code Chapter
Where possible, short sections of copper tube shall be brazed onto the non-copper component, and the interior of the subassembly shall be cleaned of flux prior to installation in the piping system. [NFPA 99:5.1.10.4.4.5]
Upcodes Diagrams
Related Code Sections
1321.9.3 Health Care Facilities and Medical Gas and Medical Vacuum Systems, Short Sections of Copper
Where possible, short sections of copper tube shall be brazed onto the non-copper component, and the interior of the subassembly shall be cleaned ...
609.3 Water Supply and Distribution, Under Concrete Slab
Field wrapping shall provide equivalent protection and shall be restricted to those short sections and fittings necessarily stripped for threading ...
(B) Wiring and Protection, Feeder Taps
-Circuit Formula for Copper Conductors (I2/A2) t = 0.0297 log10 [(T2 + 234)/(T1 + 234)] (2) Short-Circuit Formula for Aluminum Conductors ...
1101.4.1 Storm Drainage, Copper and Copper Alloys
Joints and connections in copper and copper alloy pipe and tube shall be installed in accordance with Section 705.3 ...
803.2 Indirect Wastes, Copper and Copper Alloys
Joints and connections in copper and copper alloy pipe and tube shall be installed in accordance with Section 705.3 ...