// CODE SNIPPET
R602.12.2 Sheathing Materials
JUMP TO FULL CODE CHAPTER
Related Code Sections
R602.12.2 Wall Construction, Sheathing Materials
The following sheathing materials installed on the exterior side of exterior walls shall be used to construct a bracing unit as defined in Section ...
Residential Code 2018 of Kansas > 6 Wall Construction > R602 Wood Wall Framing > R602.12 Simplified Wall Bracing > R602.12.2 Sheathing Materials
R603.9.1 Wall Construction, Sheathing Materials
Structural sheathing panels shall consist of minimum 7 / 16 -inch-thick (11 mm) oriented strand board or 15 / 32 -inch-thick (12 mm) plywood ...
Residential Code 2018 of Kansas > 6 Wall Construction > R603 Cold-Formed Steel Wall Framing > R603.9 Structural Sheathing > R603.9.1 Sheathing Materials
R316.8 Building Planning, Wind Resistance
with SBCA FS 100 for wind pressure resistance unless installed directly over a sheathing material that is separately capable of resisting the wind load ...
P2603.3 General Plumbing Requirements, Protection Against Corrosion
, the sheathing material thickness shall be not less than 0.008 inch (8 mil) (0.203 mm) and shall be made of plastic. Where sheathing protects piping ...
Residential Code 2018 of Kansas > 26 General Plumbing Requirements > P2603 Structural and Piping Protection > P2603.3 Protection Against Corrosion
2308.5.11 Wood, Exterior Wall Sheathing
shall be sheathed with one of the materials of the nominal thickness specified in Table 2308.5.11 with fasteners in accordance with the requirements ...
Building Code 2018 of Kansas > 23 Wood > 2308 Conventional Light-Frame Construction > 2308.5 Wall Construction > 2308.5.11 Exterior Wall Sheathing