// CODE SNIPPET
A112.2.3 Shear Walls Without Openings
JUMP TO FULL CODE CHAPTER
Shear walls without openings shall be analyzed the same as for walls with openings, except that Vr shall be calculated as follows:
Related Code Sections
A112.2.3 Seismic Strengthening Provisions for Unreinforced Masonry Bearing Wall Buildings, Shear Walls Without Openings
Shear walls without openings shall be analyzed the same as for walls with openings, except that V r shall be calculated as follows: ...
Existing Building Code 2015 of Idaho > A1 Seismic Strengthening Provisions for Unreinforced Masonry Bearing Wall Buildings > A112 Analysis and Design > A112.2 Existing Unreinforced Masonry Walls > A112.2.3 Shear Walls Without Openings
R606.12.2.1 Wall Construction, Minimum Length of Wall Without Openings
Table R606.12.2.1 shall be used to determine the minimum required solid wall length without openings at each masonry exterior wall. The provided ...
Idaho Residential Code (2020 Edition) > 6 Wall Construction > R606 General Masonry Construction > R606.12 Seismic Requirements > R606.12.2 Seismic Design Category C > R606.12.2.1 Minimum Length of Wall Without Openings
R606.12.2.1 Wall Construction, Minimum Length of Wall Without Openings
Table R606.12.2.1 shall be used to determine the minimum required solid wall length without openings at each masonry exterior wall. The provided ...
2017 Idaho Residential Code > 6 Wall Construction > R606 General Masonry Construction > R606.12 Seismic Requirements > R606.12.2 Seismic Design Category C > R606.12.2.1 Minimum Length of Wall Without Openings
Section A103 Seismic Strengthening Provisions for Unreinforced Masonry Bearing Wall Buildings, Definitions
A111.3 and the definition of Section A111.3. A crosswall is not a shear wall. [BS] CROSSWALL SHEAR CAPACITY. The unit shear value times the length ...
Existing Building Code 2015 of Idaho > A1 Seismic Strengthening Provisions for Unreinforced Masonry Bearing Wall Buildings > A103 Definitions
12.5.3 Diaphragms, Shear
) Mechanical connectors crossing joints between precast elements shall be designed to resist required shear under anticipated joint opening ...
Building Code Requirements for Structural Concrete of Idaho > 12 Diaphragms > 12.5 Design Strength > 12.5.3 Shear