UpCodes logo
// CODE SNIPPET

Section 3009 Service Equipment Certificates

Go To Full Code Chapter
3009.1 Required
No service equipment shall be placed in operation until a service equipment certificate of compliance has been obtained in accordance with the provisions of this code.
3009.2 Posting of Inspection Certificate
At the time a service equipment Certificate of Compliance is issued, an inspection certificate issued by the commissioner shall be posted. No such inspection certificate shall be issued for elevators that are not subject to periodic inspections pursuant to this code. The inspection certificate shall be in such form as the commissioner shall determine by rule and shall be posted in a frame with a transparent cover in the car of every passenger and freight elevator and on or near every escalator and moving walk and power-operated scaffold.
3009.2.1 Alternate Posting Locations
In lieu of posting the inspection certificate in those locations specified in this section, the inspection certificate may be kept in the on-site building manager's office. In such case, the building manager's office must be open during normal business hours. In addition, notice must be posted in each location listed in Section 3009.2 and kept in a frame with a transparent cover, or a plaque or on the car operating panel, with an indelible inscription, stating that the inspection certificate is located in the building manager's office and identifying the location of such office.
3009.3 Temporary Use Certificates
The commissioner may issue temporary use certificates for any equipment or device regulated by this code, except power-operated scaffolds, provided that such partial use and operation may be made safely and without endangering public health, safety, and welfare and provided further that such temporary use certificate shall not be issued for a period of more than 30 calendar days, subject to renewal for additional 30-day periods at the discretion of the commissioner. Temporary use certificates for elevators shall also be conditioned upon compliance with the following:
  1. The class of service to be permitted shall be designated on the temporary use certificate.
  2. The hoistway shall be enclosed throughout in an enclosure complying with ASME A17.1/CSA B44 or with a temporary enclosure in accordance with the requirements for workers' elevators (temporary elevators) of the Industrial Code of the State of New York, No. 23.
3009.3.1 Posting of Temporary Use Certificate
The temporary use certificate shall be posted in a conspicuous location on, or adjacent to, the device covered by the certificate and shall state that the device has not been finally approved by the commissioner.

Related Code Sections

Section 3007 Elevators and Conveying Systems, Service Equipment Certificates
No service equipment shall be placed in operation until a service equipment certificate of compliance has been obtained in accordance ...
Section 3009 Elevators and Conveying Systems, Service Equipment Certificates
No service equipment shall be placed in operation until a service equipment certificate of compliance has been obtained in accordance ...
Section 3009 Elevators and Conveying Systems, Service Equipment Certificates
No service equipment shall be placed in operation until a service equipment certificate of compliance has been obtained in accordance ...
3009.3 Elevators and Conveying Systems, Temporary Use Certificates
The commissioner may issue temporary use certificates for any equipment or device regulated by this code, except power-operated scaffolds, provided ...
3007.1 Elevators and Conveying Systems, Required
No service equipment shall be placed in operation until a service equipment certificate of compliance has been obtained in accordance ...