// CODE SNIPPET
E3601.6 Service Disconnect Required
Go To Full Code Chapter
Means shall be provided to disconnect all conductors in a building or other structure from the service entrance conductors. (230.70)
E3601.6.1 Marking of Service Equipment and Disconnects
Service disconnects shall be permanently marked as a service disconnect. [230.70(B)]
E3601.6.2 Service Disconnect Location
The service disconnecting means shall be installed at a readily accessible location either outside of a building or inside nearest the point of entrance of the service conductors. Service disconnecting means shall not be installed in bathrooms. Each occupant shall have access to the disconnect serving the dwelling unit in which they reside. [230.70(A)(1)(2), 230.72(C)]
Upcodes Diagrams
Related Code Sections
E3601.6 Services, Service Disconnect Required
Means shall be provided to disconnect all conductors in a building or other structure from the service entrance conductors. (230.70 ...
(A) Wiring and Protection, Service-Supplied Building or Structure
Type 2 SPDs shall be connected anywhere on the load side of a service disconnect overcurrent device required in 230.91 unless installed in accordance ...
(B) Wiring and Protection, Additional Service Disconnecting Means
The one or more additional service disconnecting means for fire pumps, emergency systems, legally required standby, or optional standby services ...
(G) Special Conditions, Connection Ahead of Service Disconnecting Means
section, or vertical switchboard section as the service disconnecting means shall be permitted. The legally required standby service shall ...