// CODE SNIPPET
402.8.7 Service Areas Fronting on Exit Passageways
JUMP TO FULL CODE CHAPTER
Mechanical rooms, electrical rooms, building service areas and service elevators are permitted to open directly into exit passageways, provided the exit passageway is separated from such rooms with not less than 1-hour fire barriers constructed in accordance with Section 707 or horizontal assemblies constructed in accordance with Section 711, or both. The fire protection rating of openings in the fire barriers shall be not less than 1 hour.
Related Code Sections
402.8.7 Special Detailed Requirements Based on Occupancy and Use, Service Areas Fronting on Exit Passageways
Mechanical rooms, electrical rooms, building service areas and service elevators are permitted to open directly into exit passageways , provided ...
Building Code 2018 of Utah > 4 Special Detailed Requirements Based on Occupancy and Use > 402 Covered Mall and Open Mall Buildings > 402.8 Means of Egress > 402.8.7 Service Areas Fronting on Exit Passageways
402.8.7 Special Detailed Requirements Based on Use and Occupancy, Service Areas Fronting on Exit Passageways
Mechanical rooms, electrical rooms, building service areas and service elevators are permitted to open directly into exit passageways , provided ...
Building Code 2015 of Utah > 4 Special Detailed Requirements Based on Use and Occupancy > 402 Covered Mall and Open Mall Buildings > 402.8 Means of Egress > 402.8.7 Service Areas Fronting on Exit Passageways
415.11.3 Special Detailed Requirements Based on Occupancy and Use, Service Corridors
travel into a fabrication area . Doors from service corridors shall swing in the direction of egress travel and shall be self-closing ...
Building Code 2018 of Utah > 4 Special Detailed Requirements Based on Occupancy and Use > 415 Groups H-1, H-2, H-3, H-4 and H-5 > 415.11 Group H-5 > 415.11.3 Service Corridors
415.11.3 Special Detailed Requirements Based on Use and Occupancy, Service Corridors
travel into a fabrication area . Doors from service corridors shall swing in the direction of egress travel and shall be self-closing ...
Building Code 2015 of Utah > 4 Special Detailed Requirements Based on Use and Occupancy > 415 Groups H-1, H-2, H-3, H-4 and H-5 > 415.11 Group H-5 > 415.11.3 Service Corridors
2705.3.3 Semiconductor Fabrication Facilities, Service Corridors
Where a new fabrication area is constructed, a service corridor shall be provided where it is necessary to transport HPM from a liquid storage room ...
Fire Code 2018 of Utah > 27 Semiconductor Fabrication Facilities > 2705 Use and Handling > 2705.3 Transportation and Handling > 2705.3.3 Service Corridors